Töörõivaste arendus autoremondi lukksepale

Käesoleva lõputöö tulemusena ja ettevõtte koostööna on valminud sisetingimustes töötamiseks töörõivaste komplektid. Esimesse komplekti kuulub püksid ja jakk ning teiseks kombinesoon. Töö eesmärgiks oli kavandada tooted, mis vastaks nii tellija kui ka tarbijate soovidele. Tarbijate vajadused selgitati välja küsitluse käigus, milles selgitati välja peamised nõuded valmistatavale mudelitele. Järgnevalt loodi võimalikult palju erinevaid mudeleid, mille seast valiti välja koos ettevõtja esindajaga lõplikud mudelid. Tooted on valmistatud kvaliteetsest ja mitmekülgsete heade omadustega tööriiete kangastest. Kangad on hästi vastupidavad hõõrdumisele, kulumisele ja furnituriteks on valitud kauakestvad helkurkandid ja kõrgkvaliteedilised YKK firma lukud. Mudelite arendust alustati põhiõigete konstrueerimise, jakile on kasutatud Mülleri „Meeste jope põhilõiget“ mille peale on modelleeritud moekohane lõige, varrukaks on kasutatud „Meeste särkpluusi varrukat“, kuna on sobiv avaruselt. Pükstele on kasutatud samuti Mülleri süsteemi ja kasutatud teksapükste ülesehitust. Kombinesoon aga on modelleeritud kokku kehaosa põhilõikest kuni vööjooneni ja lisatud pükste sääreosad. Vööjoonele on lisatud 11 cm lisa, et säiliks liikumisvabadus. Seejärel teostati esmased maketid lõigete katsetamiseks ja tehti vajalikud parandused. Järgnevalt digitaliseeriti lõiked arvutisse ja tehti vajalikud parandused ning moodustati lekaalid, millele lisati paljundus kasvudesse ja suurustesse. Lõplikult õmmeldi valmis välja prinditud lõigete järgi prototüübid. Mudel „Arno“ on poolliibuva lõikeline, pealeõmmeldud taskutega millel on figuursed klapid. Ohutuse mõttes on lisatud helkurkandid õmbluste vahele. Esikinniseks on liistu ja kahe tõmblukk kinnisega lukk. Mudel „Arni“ on sirgelõikelise tegumoga, põlvekohad on ergonoomilise lõikega, põlvekohtadel on sissevõtted ja põlvepehmenduste taskud. Lisaks on vööjoonel veniv värvel ja jalgevahel samuti veniv kiil. 78 Mudel „Arto“ on poolliibuva lõikeline, pealeõmmeldud rinnataskud ja lõigatud nurkadega küljetaskud, mille peale on asetatud veel ühed taskud mutrivõtmete jaoks. Seljaosal on veniv detail vöökohal ja vööjoon reguleeritav seestpoolt vöökummiga. Tööriiete turg ja valik on tänapäeval väga lai ettevõttteid on turu palju ning konkurents on tugev. Kui viia järelduste elluviimine ja veel toodete katsetamine ning edasi arendamine oleksid valminud tooted ka konkurentsivõimelised tööriiete turul. Kindlasti tuleks arendada antud mudeleid edasi ja seejärel saavutada väga head ja kvaliteetsed tooted.

The result of this diploma thesis is a set of indoor workwear, which has been completed in a collaboration with a company. The set includes pants and a jacket as well as overalls. The purpose of the work was to design products, which would meet both the customer as well as consumers needs. The necessities of the consumers were formulated in a survey. The feedback provided information about the needs of the customers for whom the clothes are meant for. In the next stage of the constructing process, a range of different designs were created, and the final styles were picked out with the representatives of the company. The products are made out of high quality fabrics and versatile materials, which are especially suitable for creating workwear. Selected fabrics are very resistant to abrasion and wear. The trims, that have been selected for the garments, are long-lasting reflector seams and high-quality YKK zippers. The process of designing started with constructing the block patterns of the clothing. The jacket has been designed using M. Muller & Sohn’s sloper for men’s jacket, which has been modified according to trend. The sleeves are constructed using Mullers’ pattern for mens’ shirt sleeve, because it has a suitable loose cut for workwear. The pants have also been formed following the Muller & Sohn’s system based on the construction of jeans. The bodice of the overalls are designed according to the block pattern, with pants added onto the bodice. An additional 11 cm of fabric has been added to the waistline giving extra space for better movement. In the next stage of construction the first test patterns were created to asses the patterns, which enabled to make different corrections. After that the patterns were digitized and final corrections were made on the computer. French curves, with added gradings, were also created at this stage. Finally the prototypes of the product were sewn using printed patterns. Model „Arno“ is a semi-fitted cut, with sewn-on pockets that have figurative flaps. Reflectoring trimmings have been added in-between seams for safety reasons. The front has a binding and a twoway sliding zipper. 80 Model „Arni“ is a straight-cut style. The knee parts are ergonomically fitted, with darts on the knee parts and pockets for kneepads. Additionally there is a stretchy waistband on the waistline and a stretchy wedge in-between the legs. Model „Arto“ is a semi-fitted cut, with breast pockets sewn onto it. There are also side pockets, with additional pouches for storing wrenches and other tools. An elastic waistband has been added to the back of the garment, so the waistline would be adjustable. Nowadays the market for quality workwear is very extensive. There are many businesses and the competition is harsh. If the the result of the thesis would be actualized, and the products would be improved, then these products could be very adequate in the workwear market. The models which were presented in this thesis need some further development which would lead to excellent, quality products