3D printeri tootearendus
| dc.contributor.advisor | Vaher, Kristo | |
| dc.contributor.advisor | Ots, Tõnis | |
| dc.contributor.author | Lambinen, Daniil | |
| dc.date.accessioned | 2024-05-15T04:07:19Z | |
| dc.date.available | 2024-05-15T04:07:19Z | |
| dc.date.issued | 2024-05-14 | |
| dc.description.abstract | Antud lõputöös said kõik eesmärkid täidetud, valmis oli 3D-printeri projekteeritud mudel, kuid seda saab ka kliendi äranägemise järgi muuta, selles töös tehti tugevusarvutus ja samuti olid olemas korrektsed tehnilised joonised, seega on selle projekteeritud mudeli abil võimalik juba alustada kliendi soovitud 3D-printeri tootmist. Printeri projekteerimine ei olnud lihtne, seal oli palju nüansse, mida autor ei teadnud ja ei osanud arvata, mis teda üldiselt ootab, sest autor ei ole kunagi olnud huvitatud 3D-printerite tehnoloogiast ja sortidest ning veel enam sellest, milliseid materjale kasutatakse ja kuidas neid valmistatakse. Antud lõputöö aitas avada silmad uutele asjadele ja tutvuda erinevate asjadega, millega autor ei olnud kokku puutunud, kuid lõputöö raames tuli palju õppida, et otsida infot, samuti oli raskusi projekteerimisel, kuna nende programmidega töötamise kogemus oli väike ja autori jaoks töö oli täiesti uues programmeerimiskeskkonnas. Mudeli projekteerimine oli väga raske ja nõudis palju teadmisi erinevates tehnoloogiakeskkondades, tervikpildi saamiseks oli vaja rohkem õppida ja otsida infot, et saada täisväärtuslik töö, millest nad saavad teha vastava printeri. Lõppkokkuvõttes võib öelda, et töö oli põnev, nõudis teadmisi ja arusaamist sellest, mida teed ning pead valdama hästi valdkonnaga seotud teadmisi ja veelgi enam, töö on toonud palju kasulikke teadmisi, mis võivad olla kasulikud igapäevaelus kui ka töökeskkonnas. | |
| dc.description.abstract | In this thesis all the objectives were fulfilled, the designed model of the 3D printer was ready, but it can also be modified according to the customer's needs, in this work the strength calculation was done and also the correct technical drawings were available, so with this designed model it is already possible to start the production of the 3D printer desired by the customer. Designing the printer was not easy, there were many nuances that the author did not know and did not know what to expect in general, as the author has never been interested in the technology and varieties of 3D printers, and even less in what materials are used and how they are made. This thesis helped to open the eyes to new things and to get acquainted with different things that the author had not been exposed to, but the thesis involved a lot of learning to search for information, as well as some difficulties in designing, as the author had little experience of working with these programs and was working in a completely new programming environment. Designing the model was very difficult and required a lot of knowledge in different technology environments, to get the complete picture they had to learn more and search for information to get a complete work from which they can make the corresponding printer. All in all, the work was fascinating, demanded knowledge and understanding of what you are doing and you need to have a good command of the knowledge related to the field, and what is more, the work has brought a lot of useful knowledge that can be useful in everyday life as well as in the working environment. | |
| dc.identifier.uri | https://dspace.tktk.ee/handle/20.500.12863/5201 | |
| dc.language.iso | et | |
| dc.publisher | Tallinna Tehnikakõrgkool | |
| dc.subject | Mehaanika::Robotitehnika | |
| dc.subject.other | Robotitehnika | |
| dc.title | 3D printeri tootearendus | |
| dc.title.alternative | 3D Printer Product Development | |
| dc.type | lõputöö |