Toom-Kuninga korterelamu elektripaigalduse tööprojekti kavandamine

dc.contributor.advisorMandre, Andres
dc.contributor.authorOskar, Kitt
dc.date.accessioned2021-03-17T10:31:38Z
dc.date.available2021-03-17T10:31:38Z
dc.date.issued2019
dc.description.abstractLõputöö tegemise jaoks leitud praktikakohas SimTech OÜ valmis äripindadega korterelamu tööprojekt. Tööprojekti koostmise aluseks oli põhiprojekt. Projekti põhiülesanne, milleks oli valgustus- ja jõupaigaldusplaanide ning jaotuskeskuste skeemide tegemine, sai autori poolt teostatud. Plaanide ja skeemide valmistamiseks kasutati projekteerimistarkvara CADS Electric. Lõputöö autor sai töökogemusi projekteerimistarkvara uute funktsioonide kasutamises. Paigaldajatega suhtlemisel selgus, et üldiselt ollakse tööprojektide kvaliteediga rahul . Paar aastat tagasi teostati töid ka ilma tööprojektideta. Tagasisides esines vaid üksikuid märkusi plaanide kohta. Lõputöö teema oli „Toom-Kuninga korterelamu elektripaigalduse tööprojekti kavandamine “. Antud töö tulemusena: • koostati paigaldajatele lihtsalt loetav ja arusaadav tööprojekt; • uuriti paigaldajatelt probleemseid kohti tööprojekti joonistel. • pakuti lahendusi paigaldajate märkustele Töö eesmärgid said täidetud. Tellija kiitis tehtud tööprojekti heaks ning SimTech OÜ jäi praktikandiga rahule. Paigaldajate tagasisidet arvesse võttes pakuti välja lahendusi, kuidas muuta tööprojekte neile arusaadavamaks. Kuna autor plaanib tööle asuda projekteerijana, saab lõputöö tulemusi tulevikus rakendada.et
dc.description.abstractFor thesis SimTech OÜ was found to do internship, where installation project of apartment building with commercial premises was made. The basis for the installation project was the main project. The main task of the project, which was to make lighting and power installation drawings and distribution center schemes, was done by the author. CADS Electric design software was used to produce plans and schemes. The author of the thesis gained work experience in using new features of design software. When communicating with installers, it turned out that the quality of work projects is generally satisfied. A few years ago, work was also done without installation projects. There were only a few comments on the drawings in the feedback. The theme of the thesis was “Planning the electrical installation project for Toom-Kuninga apartment building”. As a result of this work: • an easy-to-read and understandable work project for installers; • The problematic places in the drawings of the work project were examined from the installers. • Solutions for Installer Comments were offered The goals of the work were fulfilled. The client praised the installation project and SimTech OÜ was satisfied with the trainee. With the help of installers' feedback, solutions were proposed to make installation projects more understandable to them. As the author plans to work as a designer, the results of the thesis can be applied in the future.en
dc.identifier.urihttps://dspace.tktk.ee/handle/20.500.12863/2355
dc.languageet
dc.publisherTallinna Tehnikakõrgkool
dc.subject.classificationConstruction--Building Construction--Building Construction and Design--Building Designen
dc.subject.classificationConstruction--Building Construction--Building Construction and Designen
dc.subject.classificationMechanical Engineering--Electrical Engineering and Electrical Equipmenten
dc.subject.classificationEhitus--Hoonete ehitus--Hoonete ehitus ja kavandamine--Hoone kavandamineet
dc.subject.classificationEhitus--Hoonete ehitus--Hoonete ehitus ja kavandamineet
dc.subject.classificationMehaanika--Elektrotehnika ja elektriseadmedet
dc.subject.otherElektritehnikaet
dc.subject.otherElectrical Engineeringen
dc.titleToom-Kuninga korterelamu elektripaigalduse tööprojekti kavandamine
dc.title.alternativePlanning the electrical installation project of Toom-Kuninga apartment building
dc.typethesisen
dc.typelõputööet

Failid