Normeerimise ja marsruudi loomise kontseptsioon Ettevõtte x näitel
| dc.contributor.advisor | Ševtšenko, Eduard | |
| dc.contributor.advisor | Truver, Anna | |
| dc.contributor.author | Laanemets, Hendrik | |
| dc.date.accessioned | 2023-05-16T08:29:42Z | |
| dc.date.available | 2023-05-16T08:29:42Z | |
| dc.date.issued | 2023-05-15 | |
| dc.description.abstract | Lõputöö autor valis teemaks „Normeerimise ja marsruudi loomise kontseptsioon Ettevõtte x näitel“. Lõputöös seati järgnevad eesmärgid: • Maksimeerida tootmiseks olevat aega võrreldes hetke olukorraga, mille kaudu on plaanis saada rohkem ressursse, mis lühendab tootmise ettevalmistamiseks vajaliku aega. • Töötada välja või optimeerida lahendus ehk ekspertsüsteem, mis võimaldab automatiseerida marsruuti, retsepti ja materjalinimekirja koostamist. Kontseptsiooni lahenduse süsteem peab pakkuma alternatiivseid marsruute, mille eesmärgiks on ühtlustada töökeskuste koormused. Lahendus tõstab tootmisprotsessi ajalise täpsuse marsruudi loomisel 90 % peale. Teoreetiliseks aluseks valiti digitaalse ärianalüüsi metoodika, lähtuvalt Ettevõte x soovist parendada ettevõtte äriprotsesse. Ärianalüüsi alusel loodi uurimise struktuur ning äriprotsesside juhtimise teooria alusel äriprotsesside modelleerimise keele valik, milleks on EPC ja VACD. Kontseptsiooni loomiseks uuriti Ettevõte x konteksti, sisemist ja välist, mis toetab äriprobleemi konteksti lähtudes uurimisel olulisema info esile toomist. Hetkeolukorra ja tulevikuolukorra kaardistamisel ARIS Connect tarkvara võimaldas esitada jooniste kujul ettevõtte väärtusahela ja alumiste tasemete tegevuste kirjeldused. Plokkskeemide jooniste vormis esitatud ajalised väärtused kirjeldavad marsruutimise ja normeerimise asukohta ahelas ja selle mõjureid ning olulisust probleemi ühe osana. Kaardistamine on aluseks lahenduse loomisele, kus on esitatud vajalikud ressursid ja muudatused uue hetkeolukorra saavutamiseks. Ettevõttes x muutub konstruktorite töövoog, kus mudeli PMI andmestike alusel ekspertsüsteem vastavalt reeglistikule loob uued marsruudid koos aegadega, mille alusel protsess automatiseerituks. Alternatiivsed marsruudid tekivad süsteemi, kus ERP süsteemi läheb valituks osutunud marsruut ehk õige vastavalt olukorrale. Tekib dünaamilisuse efekt, kus planeerija saab vajadusel kasutada teist marsruuti. Lõputöö autor kirjeldab samuti lahenduseks vajaminevaid ressursse ning kuidas toimub Ettevõttes x lahenduse muutmine tulevikuolukorra staatusest hetkeolukorraks. Kontseptsiooni positiivne mõju kandub teistesse protsessidesse, sest saadakse parametriseeritud andmed, mille alusel on hinnapakkumine täpsem ning planeerimise võimekus esialgsest kõrgem. Kontseptsioon võimaldab vähendada tootmiseks olevat aega kahe nädala võrra, mis tõstab Ettevõtte x ressursside võimekust, mille tagajärjel väheneb tootmise ettevalmituse aeg kahe nädala võrra. Kontseptsiooni lahenduse juurutamisel tõuseb tootmisprotsessi ajaline täpsus 90 % peale. 42 Lõputöö kontseptsioon vajab veel lahenduse terviklikku loomist, juurutamist, hindamist ja auditeerimist. Järgenvaks tegevuseks on ekspertsüsteemi loomine, mille valmimisel saab liikuda lahenduse hindamise faasi, kus valitakse vastavad tooted kontseptsiooni hindamiseks. Uus kontseptsioon on sisendiks planeerimise automatiseerimise projektile. Lõputöö autori marsruudi ja normeerimise kontseptsioon toetab Ettevõttele x digitaliseerituse trendi taset. | |
| dc.description.abstract | The Bachelor thesis topic The Concept of Standardisation and Route Creation in Company X was chosen by the author. The following goals were set out in this thesis which are: • To maximise the time available for production compared to the current situation, with the aim of obtaining more resources, which will reduce the time needed to prepare for production. • Develop or optimise a solution for automating routing and standardization. The concept solution must provide alternative routes aimed at harmonising the workloads of workstations. The solution will increase the time accuracy of the production processes to 90 % when creating a route. The theoretical basis of the digital analysis methodology is used to carry out research in Company x. Based on business analysis, a research structure was followed to point out necessary steps to carry out research regarding business processes. Business process modelling languages EPC and VACD are chosen to visualize and describe Company x AS is situation and To be situation. The business context, internal and external of Company x, was analysed in order to create conceptual framework which supports the highlighting of the relevant information needed to be elicited. Mapping of the current situation (AS IS) and future situation (TO BE) was done with ARIS connect software which enabled the presentation of the Company´s x value chain and lower level activities in the form of diagrams. The temporal values, presented in the form of block diagrams, describe the position of routing and standardisation in the value chain and its drivers plus importance as part of the business problem. The mapping is the basis for the creation of a solution, setting out the resources and changes needed to achieve the new AS is situation. In Company x the workflow of the designers changes, where the expert system creates new routs with times based on the PMI input data of the model. Workstation rules which are in the expert system assure possible routs are given in output. Alternative routs are generated by the system, where the ERP software receives optimal route with times according to the situation when decision is made. A dynamic effect comes into play where the production planner can plan a different rout if necessary and display it immediately in ERP software. The author of this thesis described the resources required for the solution and how to transition from current situation to future situation (TO BE). The positive impact of the new concept is carried over to other processes, as parameterised data is obtained, resulting in a more accurate quotation and higher planning capacity percent rise. Improvements in routing and standardisation allow time to be gained in other processes, which together will reduce the time needed to prepare for production and gain additional time for 44 manufacturing. The concept allows to reduce the time available for production by two weeks, which increases the resource capability of Company x, resulting in a reduction of two weeks in the pre production time. By implementing the concept solution, the time accuracy of the production process is increased to 90 % when creating a route. The bachelor’s thesis concept still needs a comprehensive solution creation, deployment, evaluation and audit. The next step will be the creation of an expert system, which once completed, will allow the solution to be tested with selected products. The new concept presented in this thesis will be an input to the planning automation project. Routing and standardisation concept will provide basis for company x to improve its level of digitalisation. | |
| dc.identifier.uri | https://dspace.tktk.ee/handle/20.500.12863/4738 | |
| dc.language.iso | et | |
| dc.publisher | Tallinna Tehnikakõrgkool | |
| dc.subject | Majandus and ärijuhtimine::Protsesside modelleerimine | |
| dc.subject.other | Tootmine ja tootmiskorraldus | |
| dc.title | Normeerimise ja marsruudi loomise kontseptsioon Ettevõtte x näitel | |
| dc.title.alternative | The Concept of Standardisation and Route Creation in Company X | |
| dc.type | lõputöö |